PI®-Technology Installation Videos

Installation of the PI®-Power Compact system

Please note: The PI®-Power Com­pact must be installed and com­mis­sioned with­in 7 days after deliv­ery.
1. Unboxing
This video is an overview of the deliv­ery and con­tent of the deliv­ery box.

2. Location and inventory check
Before you install the PI®-Power Com­pact sys­tem, a few details in respect to the kitchen’s fur­ni­ture and nec­es­sary con­nec­tions need to be checked. In this video you’ll find all nec­es­sary ref­er­ences and tips.

3. Tools requirements
Being well pre­pared is always the most impor­tant step to suc­cess. Some nuts and bolts must be tight­ened and pipes cut dur­ing the instal­la­tion. More infor­ma­tion about it is in our third part of the PI®-Power Com­pact video series.

4. Installation of the PI®-Water tap
For the instal­la­tion of the PI®-Water tap the kitchen fur­ni­ture needs to be pre­pared. You will have to drill a hole into the kitchen table top at an appro­pri­ate loca­tion. You will find the exact “step-by-step” guide in this video.

5. Installation of the pressure reducer
The pres­sure of the mains water may under cir­cum­stances exceed the max. pres­sure lim­it for the incom­ing water. To pro­tect the direct flow reverse osmo­sis an addi­tion­al pres­sure reduc­er togeth­er with a water leak pro­tec­tion — the “Water Stop” — need to be installed.

6. Installation of the incoming water pipe “FEED”
This video is a guide for the assem­bly of the incom­ing water feed.

7. Installation the waste water pipe “DRAIN”
For the instal­la­tion of the waste water pipe we need to drill a hole into the siphon. We show you in this video, how you’ll find the prop­er spot for a sim­ple and safe instal­la­tion.

8. The pipe “PURE”. The connection between the direct flow reverse osmosis and the P®-Cell Vitalizer
This video gives you exact infor­ma­tion about the con­nec­tion between the direct flow reverse osmo­sis and the PI®-Cell Vital­iz­er as well as the con­nec­tion of the whole unit to the PI®-Water tap.

9. Direct Flow reverse osmosis — connection to the mains water system
All pipes are ready so far. Now you can con­nect the direct flow reverse osmo­sis to the incom­ing tap water. This video shows you how it works.

10. Rinsing of the direct flow reverse osmosis
Before you start the PI®-Water pro­duc­tion, you have to flush the direct flow reverse osmo­sis. Sim­ply fol­low the tuto­r­i­al video. This way you can ensure, the sys­tem is absolute­ly clean.

11. Connection and rinsing of the PI®-Cell Vitalizer
Dur­ing the flush­ing of the direct flow reverse osmo­sis, the PI®-Cell Vital­iz­er is not con­nect­ed to the sys­tem. If you want to enjoy purest PI®-Water, you have to flush the PI®-Cell Vital­iz­er before the first glass as well.