UV-LED Lamp

Image

The UV-LED lamp offers the fol­low­ing advan­tages:

  • The water is not heat­ed dur­ing treat­ment.
  • Its com­pact design allows for instal­la­tion even in con­fined spaces. For exam­ple, the UV lamp can eas­i­ly be fit­ted next to the PI®-Power Com­pact unit in your kitchen cab­i­netry.
  • LED tech­nol­o­gy is par­tic­u­lar­ly ener­gy-effi­cient and requires no chem­i­cals. This is a sig­nif­i­cant advan­tage from an envi­ron­men­tal per­spec­tive.
  • Instal­la­tion is very sim­ple and requires no tech­ni­cal knowl­edge.
  • The UV-LED sys­tem is more envi­ron­men­tal­ly friend­ly than con­ven­tion­al UV lamps as it con­tains no mer­cury. This elim­i­nates the risk of envi­ron­men­tal pol­lu­tion from this high­ly tox­ic heavy met­al.
  • Cer­ti­fied to UNE 149101 – test­ed for safe use in drink­ing water treat­ment.
Dimensions
  • 66 x 155 x 50 mm (W x H x D, with­out con­nec­tors)
Performance data
  • Pow­er: 10.5 W
  • Pres­sure: 0.8 MPa
  • Out­put volt­age: 24 VDC 1 A
  • Oper­at­ing tem­per­a­ture: 2°C – 65°C
  • Con­nec­tions: 3/8″, 1/4″ adapter includ­ed
  • Flow rate with upstream reverse osmo­sis: 7 l/min
  • Flow rate with fil­tered water (fil­ter size 10 microns): 3–5 l/min
  • Acti­va­tion at a min­i­mum flow rate of 0.5 l/min
  • Ster­il­i­sa­tion rate: ≥ 99.9% (E. coli) / ≤7 LPM
  • Oper­at­ing life TPL: 3,000 hours
  • Water resis­tance: IPX7
Materials
  • Polypropy­lene PP
  • Alu­minum alloy

Purification process

The UV LED lamp has a built-in auto­mat­ic switch that is acti­vat­ed dur­ing water flow and deac­ti­vat­ed when the sys­tem is idle. The oper­at­ing sta­tus is indi­cat­ed by an LED.

Image
UV-LED lamp is on stand-by.
Image

UV-LED lamp is in oper­a­tion

Image
UV-LED lamp end of life

UV-LED lamp installation

Image

The UV-LED lamp is installed after the Direct Flow reverse osmo­sis sys­tem and before the PI®-Cell Vital­iz­er.

It is essen­tial to ensure that the flow direc­tion is cor­rect. The inlet is on the side where the pow­er cable is attached.

The con­nec­tions use the John-Guest con­nec­tor sys­tem. The pipe between the Direct Flow reverse osmo­sis unit and the PI®-Cell Vital­iz­er must be cut clean­ly at a 90° angle. When con­nect­ing the parts, a lit­tle force must be applied to ensure the con­nec­tions are tight.

Anschluss PI®-Power Compact 300
Für den Anschluss eines 1/4″ Rohres zwis­chen der Direct Flow Umkehros­mose und dem Ein­gang des PI®-Cell Vital­iz­ers sind die beigelegten Adapter zu ver­wen­den.
Image
Anschluss PI®-Power Compact 450
Ein 3/8″ Rohr kann direkt mit dem Anschluss der UV-LED Lampe ver­bun­den wer­den.
Image